Kiss Electric - Local Electricians - Levittown, Pa - New Egypt Speedway Image

Do You Like a Family Night Out?

If so, why not go to the New Egypt Speedway to watch the stock car races!! Why? Because a local driver is driving the circuit this year.

I am Walter “Glenn” McIntyre of Levittown, Pa. I will be driving my new car the #88 around the oval.

Come hear the THUNDER ROLL AND SEE THE SPARKS FLY as we race for the championship. I grew up in Levittown, went to Neshaminy High, then joined the Army after which I went on to make a career in the Army Reserves. I had four deployments and retired in 2018.

Continue reading “Do You Like a Family Night Out?”

Kiss Electric - Toolbox Tuesday Logo Image

ToolBox Tuesday – Computer Eye Strain

Today we’ll talk about a growing problem around the world as technology continues to bombard our lives at work and at home eye strain. As more people use computers in the workplace and at home, complaints of eye fatigue, difficulty focusing and discomfort have become commonplace. Computer video display terminals don’t damage vision, but you might still experience eyestrain. Humans normally blink around 15 times each minute. When staring at screens, this number decreases to a half or third that often. That can lead to dry, irritated, and tired eyes.

Eye strain caused by screens has its own name. It’s called computer vision syndrome (CVS). Currently there is no evidence that CVS causes any long-term damage. However if these symptoms are not properly treated your work can suffer and the discomfort will continue. According to experts, computers do not emit any harmful rays to cause damage or ‘burn’ the eyes, however it can be uncomfortable if there is a glare or if the lighting of the office or computer is too bright.

In a study published by the Nepalese Journal of Ophthalmology, researchers examined computer
use and its effects on the eyes of university students in Malaysia. Almost 90 percent of the 795 students had symptoms of CVS after just two continuous hours of computer usage. Fortunately, rearranging your computer workstation, taking more frequent rest breaks, or getting proper glasses can often relieve these symptoms, says Academy spokesperson Ruth Williams, M.D.
To pinpoint the cause of your discomfort, first get an eye exam by your ophthalmologist, who can rule out the possibility of eye disease as the cause of your symptoms. You may find you need glasses when working at a computer, or that your prescription needs updating.

Next, take a look at your computer workstation: Screen distance: You should sit about 20 inches from the computer monitor, a little farther away than reading distance, with the top of the screen at or below eye level. Equipment: Choose a monitor that tilts or swivels. Adjust them appropriately for the lighting in the room. Use a glare reduction screen
on the monitor if needed. Furniture: An adjustable chair is best. The top of the monitor should be at eye level. Place the monitor on a stand if needed. Rest Breaks: Take periodic rest breaks, and try to blink often to keep your eyes from drying out. Give your eyes a rest. Move them up, down and to both sides focusing on something at least 20 feet away. While you’re resting your eyes, it’s also a good idea to get up and grab a drink of water to keep yourself hydrated. If your body is hydrated, your eyes will be as well. Drinking green tea during your break may help even more. That’s because green tea contains antioxidants called catechins that may help your eyes produce tears for better lubrication.

The 20/20/20 rule, if followed, helps reduce fatigue and eye strain. It is pretty simple and states: Every 20 minutes, take at least 20 seconds and look away from your work/screen and focus on something else that is at least 20 feet away from you. Seems like a pretty simple rule but it can be very effective in reducing the strain on your eyes by taking that short break every 20 minutes. In addition it is suggested that you take this little mini-break to do the following to help reduce muscle fatigue throughout your body:
Get up out of your chair Blink your eyes rapidly to propagate tear production Stretch your legs and arms Walk around if you are able. Turn your neck and move your shoulders around.Try this the next time you find yourself spending a lot of time in front of the computer screen.

Take a 20 second break every 20 minutes, stretch and look at something else at least 20 feet away. You probably get absorbed in reading or work when you’re looking at screens. Setting a timed reminder to pop up can help you take a break every 20 minutes. There are also free apps like Eye Care 20 20 20 that can help. Just click start when you begin your screen time, and the
app will remind you to take a break.

Kiss Electric - Toolbox Tuesday Logo Image

ToolBox Tuesday – Lock-out / Tag-out

ToolBox Tuesday- Safety Tool Box Talk
Our Team is our Greatest Asset!!

Anyone who operates, cleans, services, adjusts, and repairs machinery or equipment should be aware of the
hazards associated with that machinery. Any powered machinery or electrical equipment that can move in a way that
would put people in danger is a hazard that can be prevented by following locking or tagging procedures. Failure to lock
out or tag power sources on equipment can result in electrocutions, amputations, and other serious-sometimes fatalaccidents.

Just this past week there were a few stories in the news about workers who died doing their job related to not
having control of hazardous energy. What are the most common causes of these accidents?

The machine or piece of equipment was not completely shut off before a maintenance or repair operation. Not
only must the machine be turned off but also the power source that goes to it.
The machine was turned on accidentally, either out of carelessness or because the person who turned it on didn’t
realize that another worker was there and could get hurt.

The machine wasn’t working correctly but wasn’t fixed, turned off, locked or tagged, and someone who didn’t
know about the problem used it.

Moving equipment wasn’t blocked.

Safety procedures were inadequate or hadn’t been properly explained.

Remember the dangers and be on your guard around any machinery and moving equipment. Even if you don’t
operate the machinery, you could get caught in it and injured if it isn’t properly disconnected. So what can you do to
prevent accidental injury from moving machinery?

Ensure you know the hazardous energy associated with your equipment prior to doing any work on it.
Ensure you know all the energy that could affect the task (electric, gravity, water, pneumatic, hydraulic, steam,

Ensure you control the accidental release of the energy prior to working on the equipment through lockout,
tagout or alternative measures identified for your specific equipment.

Never reach into moving equipment. In even the blink of an eye you could have a life changing injury.

Test the energy after you believe it to be isolated. This is one of the most overlooked steps and probably the most
important. Employees think they have isolated the energy at the source, but it isn’t for one reason or another.
Be aware of your personal safety and the safety of others when working with or around moving equipment and
machinery. Always follow proper lockout and tagout procedures, even for a quick or minor repair!

As OSHA states in their standard, the purpose of LOTO is to prevent the “unexpected” energization or start up of the machines or equipment, or release of stored energy could cause injury to employees.

Depending on the task you are performing you need to evaluate and isolate the systems and sources of energy that could cause injury

Kiss Electric - Toolbox Tuesday Logo Image

Understanding Electricity And Breaker Panels

The process of forcing electrons to move through a material creates electricity. A standard generator performs
this process. The best material for carrying electricity is a “conductor.” Most metals are excellent conductors and the
most common material used for electrical wiring is copper.

In order to provide protection from direct contact with the conductor, an “insulator” is used as a cover around the
conductor. Electrons will not move easily through insulators such as most plastics and rubber. Insulators and proper
grounding help to prevent electrical shocks. Typically, electricity is provided to your building or facility by way of
underground or overhead power lines originating from a nearby electrical power plant. The power lines feed into your
electrical breaker panel (s). Each breaker in a panel represents a circuit supplying electricity to a designated area of your

The majority of your electrical safety considerations begin at the breaker panel. Here are some basic safety considerations for all panels:

1) The breaker panel should be readily and easily accessible at all times. Do not store any items on the floor area directly in front of the panel. Maintain an aisle in front of the panel that is at least three feet wide.

2) The panel should have a closed cover. The cover should not be locked unless work is in progress requiring that the cover be
locked as part of the lock out procedure.

3) The panel should have a directory index identifying each individual circuit breaker. It is usually found secured to the inside face of the cover. The directory should identify the various receptacles, general area, or equipment serviced by each circuit breaker.

4) There should not be any missing breakers or other openings in the breaker faceplate that would allow you to contact the “hot”
electrical bus at the back of the panel.

5) Dust may damage the breakers to the point where they will not “trip” when needed.

6) Breakers should never be taped or otherwise secured in the “closed” (on) position.

7) Each circuit breaker and circuit is rated for a maximum amount of amperes. An ampere is the unit for measuring the rate of flow of electricity through the circuit. If the rate of flow in the circuit exceeds the designated maximum for the breaker, the breaker “trips” and stops the flow of electricity. If the breaker is not allowed to trip, insulators could melt from excessive conductor heat caused by electricity flowing too fast! Fires or increased exposure to shock may also occur.

8) Lastly, breakers should not be taped in the “open” position as a means of de-energizing the circuit during repair or maintenance activity. Open breakers should be properly tagged or locked out.


Solar Energy - Go Solar in 2019 Main Image

Solar Energy – 10 Reasons to Go Solar in 2019

Solar energy is rapidly becoming a popular option for our massive fuel hungry society. As we move further away from using those nasty fossil fuels into the era of reducing carbon footprints and going green, renewable energy sources are becoming more affordable and accessible to homeowners and businesses throughout the world. This article will highlight 7 reasons to go solar in 2019.

1. Solar Energy is Renewable Energy

Solar panels harness the light and heat that has traveled 92 million miles from the sun. The sun will eventually stop producing fuel and turn into a red giant star, but not for about another five billion years so there’s no issue of running out of fuel anytime soon.

Continue reading “Solar Energy – 10 Reasons to Go Solar in 2019”